Mondraker

2027 Mondraker Zendit RR S 29"/27.5"

$12,999.00

In store: Check availability

SKU: 010.27US204

Avinox M2S Motor | MX Wheels | 170mm/165mm Travel

Size:

Add to compare Add to wishlist

Delivery time: 5-7 Business Days | *Bicycle shipping calculated at checkout.

Mondraker 2027 Mondraker Zendit RR S 29"/27.5"

2027 Mondraker Zendit RR S 29"/27.5" — Size : Vortex Grey - Large

Description

From the manufacturer

Announcing the all-new ZENDIT,
the flagship Mondraker e-MTB that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox M2S drive system.

Designed for aggressive riding on the nastiest climbs and descents, ZENDIT is the result of over 11 years of e-MTB development, combined with the no-holds-barred approach to suspension performance from the Mondraker Factory Racing development team.

Zendit was created for those who see the mountains as a challenge, as a place to push the boundaries. A bike with character, energy, and an almost instant response to every challenge. When the slope steepens, the ride gets faster and the terrain becomes unpredictable, everything falls into place. Zendit unleashes its full potential.

Feel the freedom of seamless power and unrivalled performance. Lean into every ride with the confidence and determination of being in total control, even in the most demanding situations.

Features

Drive		ZENDIT is constructed from the ground up around the latest Avinox M2S drive system. Motor 130Nm torque \| 150Nm torque in Boost Mode 1300w Peak Power \| 250w Nominal Power 800% Assistance level Battery 800Wh, integrated Self-discharge, State Of Health (SOH) management and Voltage Reduction to maximise battery life Maintains 80% of capacity after 500 charge cycles
Frame		Stealth Air Carbon, The Next Revolution Rather than adapting an existing platform, the ZENDIT frame was designed to house the most advanced motor system on the market. This frame is highly advanced in both design and manufacture. For the first time 6-Axis CNC machines are used for frame drilling and finishing in place of hand finished frames.
Bearings		New Sealed Bearings ZENDIT takes advantage of everything learnt from the MFR DH development team and uses the same pivot system as the new and proven Summum DH frame.With single-size Enduro Max bearings throughout, maintenance becomes easier and two additional rubber seals help the bearings last longer.
MX Geometry		Proportion Matters As with other bikes over 150mm of rear wheel travel, ZENDIT comes stock with a mixed wheel configuration - it’s the best overall performance for the aggressive riding. But it can easily rock 29’’ wheels for even more climbing capability! ZENDIT features proportional chainstay lengths depending on the sizes. S; M and M/L sizes offer the same 450mm chainstay length, whereas the L and XL models are 5mm longer at 455mm. By slightly adjusting pivot placement in all sizes, the same leverage ratio is achieved throughout. So, no matter what size you need, you get the same ride qualities.
Suspension		Suspension Kinematics The ZERO suspension kinematics are completely revised to reflect what the Avinox M2S motor can output. There is more support and a more active suspension action to make sure the increased power gets to the trail. A 36-tooth chainring further enhances drivetrain durability, whilst optimised Anti-Squat figures maintain a balanced, efficient ride with every pedal stroke. Mondraker and Fox have worked closely to offer the best performance for ZENDIT in terms of rear suspension. The latest Fox Float X shocks on the RR and RR S models as well as the latest Fox Float X2 shock on the XR model have a specific tunning adapted to the kinematics of the bike, maximizing its performance and ride feel.

Geometry

	Size	S	M	M/L	L	XL
A	Seattube length	380mm	410mm	435mm	460mm	490mm
B	Toptube length	586mm	606mm	628mm	650mm	672mm
C	Bottom bracket drop	6mm	6mm	6mm	6mm	6mm
D	Bottom bracket height	345mm	345mm	345mm	345mm	345mm
E	Chainstay length	450mm	450mm	450mm	455mm	455mm
F	Seat tube angle	73.5°	73.5°	73.5°	73.5°	73.5°
G	Effective seattube angle	77°	77°	77°	77°	77°
H	Headtube angle	63.5°	63.5°	63.5°	63.5°	63.5°
I	Fork Offset	44mm	44mm	44mm	44mm	44mm
J	Wheelbase	1241mm	1261mm	1286mm	1315mm	1339mm
K	Headtube length	110mm	110mm	120mm	130mm	140mm
L	Reach	440mm	460mm	480mm	500mm	520mm
M	Stack	631mm	631mm	640mm	649mm	658mm
N	Stem Length	null	null	null	null	null
O	Fork Height	null	null	null	null	null

Specifications

Frame
Wheel Size	29"
Travel
Fork
Rear Shock
Headset
Shifter
Rear Derailleur
Cassette
Chain
Chainring
Crankset
Brakes
Rotors
Seatpost
Handlebar
Stem
Grips
Saddle
Pedals	N/A
Front Wheel
Rear Wheel
Front Tire
Rear Tire
Drive Unit
Battery
Display
Extras	N/A
Sizes