Use Nikwax TX.Direct®Wash-In in a washing machine…
IMPORTANT: Shake bottle before use. Conventional detergent can damage water repellency. Always clean first with Nikwax Tech Wash in a separate wash cycle.
Front Loading Machine Wash:
1. Remove all detergent build-up from the detergent dispenser.
2. Place maximum of 2 clean garments in washing machine.
3. Use 3.5fl oz/100ml per garment of TX.Direct.
4. Select a normal cycle using warm/cold water, slow spin and extra rinse if possible.
Top Loading Machine Wash:
1. Place maximum of 3 clean garments in washing machine.
2. After the machine has filled add 10fl oz/300ml of TX.Direct.
3. Select a normal cycle using warm/cold water, slow spin and extra rinse if possible.
Nikwax TX.Direct® Wash-In can be applied by hand…
Hand Wash (use gloves):
1. Immerse 1 clean garment in 2gal/7.5L of warm water in a laundry tub or sink.
2. Add 3.5fl oz/100ml of TX.Direct.
3. Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly.
4. Rinse with cold water until water runs clear.
Drying:
Air dry or tumble dry on a low setting if care label allows.
To maintain waterproofing always wash with Nikwax Tech Wash. Do not use conventional detergents.
